20 Door Handle Replacement Websites Taking The Internet By Storm
Door Handle Replacement
Door handles appear to be a small detail however, if you don't like the style or design of them, or find them difficult to use then it's time to replace them. Installing a new door handle is easy if you have patience.
Most modern door handles have cover plates that hide the screws to create a stylish appearance. If your new handle doesn't have them already connected, you'll have to attach them separately.
Remove the Old Handle
The door handle isn't only a decorative addition to your home, but it's also a safety feature that allows you to lock and unlock the door. However, over time the door handle could lose its grip, feel loose, or appear old and worn out. This is a clear indication that it's time to replace your door handle.
One of the first signs that your door handle requires replacing is if it's becoming difficult to operate. This is an issue because it means that you are unable to no longer lock or unlock your door, which could pose the risk of security for you and your family.
It's also recommended to replace the handle on your door if it is damaged or broken. A broken door handle can be very dangerous, especially in the event that your children or senior family members have difficulty opening it, and get trapped inside. It's simple to replace a broken handle on a door.
Modern door handles are usually standard sizes and should fit any door. If you aren't certain that the new door handle you are buying will work, remove the old one and take measurements of its holes in the housing. This will allow you to purchase the right size door handle.
The most straightforward method to take off your old door handle is to remove it from the door. This is typically done with a screw driver. Some door handles have a cover plate which hides the mounting screws. You will need to remove the cover plate to gain access to the screws. Once you have removed the old handle, take note of the way the spindle is attached to ensure you are able to be sure to align it when you install your new one.
You can also remove your door handle by unscrewing it from the latch mechanism. This is usually done with the screwdriver, but you'll need to find the small latch, which is located just to the left of the trim piece. After taking off the latch, remove the handle and strike plate. Then, you can remove the latch from the edge of the door.
Take off the Strike Plate
If you are replacing your handle, you'll be required to replace the latch plate, which holds the hole that the door's latch hooks into when it closes. The package the new handles come in will include two latch plates: a rectangular one and a circular one (see the diagram above detailing the parts of the door handle). If you have an rectangular latch plate, replace it with a round one. This will allow the latch to be able to hook onto the strike plate and make the handle more convenient.
The first step is to unhook the screw that holds the latch plate. The screws are often quite tight and require a bit of force to loosen them. If you can, it might be helpful to have another person assist you with this task.
The latch plate should easily lift itself out of the door after the screws have been removed. If the latch plate is stuck or doesn't move, use a small hammer to scrape the edges. This may help free the plate up.
Now you can prepare the new strike plate for installation. With the wood screws that were included with your new handles, attach the latch plate onto the inside of the doorjamb. Do not tighten the screws too much as this could damage the strike plate.
If you are not sure whether the latch plate is in its correct position, shut and then open the door to see if it latches and closes correctly. If it doesn't you'll need to adjust the strike plate up or down, or forward or back until the door shuts and latches properly.
If the door still moves or jiggles, you may have to enlarge your latch hole on the strike plate. This is more prevalent in older doors, however it could also be caused by wear and tear hinge mortises that are not deep enough or the wrong size for the latch, or from damaged or broken strike plate that is damaged or broken. If this is the situation then you should use a filing made of metal instead of a chisel or hammer to adjust the strike plate.
Removal of the Latch
The latch is the angled metal piece that is able to move in and out of the hole on the inside edge of your door. When you turn the handle, it pushes this latch forward which allows you to open the door. It also hooks in a hole on the door frame to ensure that the door stays closed. If your door wobbles when you close, a new latch may be all that is needed to correct the issue.
The screws that hold the door latch are difficult to see however, you can insert a screwdriver into an insignificant hole on the trim plate and pry the latch off. Once you've removed the trim plate, it'll be simple to take off the latch and the bolts that keep the latch and spindle in place.
If the latch doesn't easily release you can try using a paper clip or a tool to spring it loose from the handle mechanism. Place the item in the latch's slot that is recessed and gently turn or jiggle it until you feel the latch and handle begin to separate. You may need to repeat this several times before the latch comes loose enough to allow it to be pulled out.
Once the old latch is removed, you should be able to slide the new latch into the slot with no difficulties. Use your new screws to connect the latch to the strike plate or door frame. Make sure it is properly positioned in the slot and aligned with the screw chambers.
Measure the existing backset (the distance between the centre of the large hole on the front of the door and the edge) before installing the new handle. Make sure that the size of the latch of the new handle matches the measurement.
You'll require a new cylinder for your lock if you're replacing the latch and handle or if your current one is damaged. If you are not changing locks the new lock should fit in the recess you have already installed, and work with your existing keys. Pick a latch that has rectangular cover plates to match the handles you have.
Take off the cover plate
Door handles can start to look worn over time If you replace them with a modern lever-on-rose design, it's a quick and easy DIY project to decorate and will enhance the overall appearance of your home. upvc replacement door handles can buy complete sets with matching the escutcheons as well as privacy adaptors and escutcheons.
The first step in replacing an internal door handle is to remove the cover plate or rose, which hides the screws and mechanism inside. Utilize a flathead to take off the plate. It could have a slot on one edge or be held by a pin.
Once the cover plate is removed, remove the screw that holds the inside handle in place, and then set it aside. Remove the screws that hold both the outer and inner plates. You can loosen them with the help of a Philips Screwdriver. Remove the inner plates and latch from the door. Place them aside.
Most doors have an opening between the door jamb and the edge of the frame that makes room for a handle, but not all have. If yours does not, you'll need to drill a hole in the door for the new handle. The process for doing this is the same procedure opening a door using the lock, however you'll be taking extra care not to harm the frame or door.
Installing new door knob screws is necessary after holes have been made. Choose the same size as the old screws to avoid getting the handle that is too loose or tight. You'll also have to install a new latch plate and strike rod that aren't included in the majority of door handle sets.
Amazon's Choice FAERSI 2-piece chrome finish handle sets are a great choice if you're in the market of a top-quality interior door handle replacement set. It's factory-fitted and has been praised with hundreds of five-star reviews. It's a great choice to replace worn or damaged door hardware on your Chevy.